Installation of air-air and air-water heat pumps in Switzerland: comfort, savings, and energy performance

Heat pump

In Switzerland, the installation of an air-air or air-water heat pump (PAC) is an efficient solution for heating or cooling your home while reducing your energy consumption. By recovering the calories present in the outside air, these systems offer high energy efficiency and are part of a sustainable ecological approach.

Avenir Renovations Switzerland supports each client in the selection, installation, and commissioning of a heat pump, ensuring a tailored service that complies with Swiss standards and the specifics of your home.

    Select your service
    RÉNOVATION COMPLÈTE
    Rénovation complète
    EXTENSION-SURÉLÉVATION
    Extension-surélévation
    RÉNOVATION ÉNERGÉTIQUE
    Rénovation énergétique
    RÉNOVATION INTÉRIEURE
    Rénovation intérieure
    RÉNOVATION EXTÉRIEURE
    Rénovation extérieure
    AUTRE PROJET
    Autre projet
    Enter your personal details

Why choose Avenir Renovations?

Single point of contact

Complete site monitoring

Online customer area

State aid management


Why install a heat pump in Switzerland

The heat pump is much more than just a heating device. It combines energy efficiency, user comfort, and environmental respect, while adding value to your home.

A significant reduction in energy bills

By using the free energy from the air, the PAC produces more energy than it consumes. This results in substantial savings on your heating and hot water expenses.

Thermal comfort all year round

The reversible heat pump ensures heating in winter and cooling in summer. It maintains a stable and pleasant temperature throughout the home, regardless of the season.

An environmentally friendly solution

The PAC reduces CO₂ emissions compared to systems using fossil fuels. It contributes to the energy transition and meets the environmental requirements in force in Switzerland.

Steps of a heat pump installation project with Avenir Renovations Switzerland

Steps of a heat pump installation project with Avenir Renovations Switzerland

To ensure optimal and sustainable operation, our installation method follows a precise and rigorous protocol.

The different types of heat pumps available in Switzerland

The choice between an air-to-air heat pump and an air-to-water heat pump mainly depends on your heating and hot water needs, as well as your existing installation.

It captures heat from the outside air to warm the indoor air via blowing units. In reversible mode, it also serves as air conditioning in summer, enhancing comfort year-round.

It transfers heat captured from the air to a hot water circuit, supplying radiators or underfloor heating. It can also produce domestic hot water, thus serving a dual function.

Combining an air-to-water heat pump with a traditional boiler, it automatically switches to the most efficient energy source according to climatic conditions. It is an ideal solution for optimizing efficiency.

In addition to heating, it cools your interior in summer. This versatility makes it a popular choice in regions with significant temperature variations.

How much does it cost to install a heat pump in Switzerland

The price varies according to the type of heat pump, power, chosen options, and the complexity of the installation.

Type of service Price per m² (CHF) Average total price (CHF)
Air-to-air heat pump 900 to 1,200 1,800 to 2,400
Air-to-water heat pump 1,000 to 1,400 2,000 to 2,800
Hybrid heat pump 1,300 to 1,800 2,600 to 3,600

These prices include the technical study, supply, installation, adjustments, and warranty. A personalized quote is essential for an accurate estimate.

Learn more

Why trust your heat pump installation to Avenir Renovations Switzerland

Installing a PAC requires specialized technical expertise, particularly to properly size the unit and ensure its optimal performance. Avenir Renovations Switzerland guarantees you comprehensive support, from project study to commissioning.

A personalized and precise study

Our experts visit to assess your energy needs, the configuration of your home, and technical constraints. This allows us to select the most suitable model, ensuring comfort and savings.

Equipment from recognized brands

We collaborate with manufacturers renowned for the quality and performance of their PACs. All our equipment meets Swiss standards and offers a long lifespan.

A compliant and secure installation

Our certified installers ensure the setup complies with safety rules and technical specifications. Each installation is tested and adjusted for optimal operation.

Administrative support

We help you compile your file for municipal authorization requests and to obtain available grants or financial aid.

Learn more

Criteria for Choosing a High-Performance Heat Pump

The efficiency and lifespan of a heat pump depend on several factors that are essential to evaluate before purchase.

The Power Suitable for Your Home

A properly sized heat pump meets your needs without overconsumption. Poor sizing leads to premature wear and increased operating costs.

The Coefficient of Performance (COP)

The higher the COP (coefficient of performance), the more energy-efficient the heat pump is. A COP of 4 indicates that the device produces four units of heat for one unit of electricity consumed.

The Noise Level

Modern heat pumps operate much more quietly than before. However, it remains essential to check the noise level, especially if the outdoor unit is installed near a bedroom or a neighboring property.

Learn more

Regulations for Installing a Heat Pump in Switzerland

The installation of a heat pump in Switzerland is subject to specific rules to ensure safety, energy efficiency, and environmental compliance. Requirements vary by canton and municipality, but some obligations are common throughout the territory.

Municipal Authorization Required in Certain Cases

The installation of a heat pump, particularly the outdoor unit, may require prior approval from your municipality. This step allows for checking aesthetic integration, compliance with legal distances, and adherence to urban planning regulations.

Compliance with Energy and Environmental Standards

Devices must meet Swiss standards for energy efficiency and the use of refrigerants. High-performance models are preferred to minimize environmental impact.

Installation in Co-ownership or Condominium

If you live in an apartment building, it is essential to obtain the consent of co-owners to install a heat pump, especially if it alters the exterior appearance or generates noticeable noise in common areas.

Learn more

Take Advantage of Financial Assistance for Your Heat Pump in Switzerland

The installation of a high-performance heat pump entitles you to several financial supports that reduce the project's cost. These measures aim to encourage the energy transition and the use of high-efficiency equipment.

Cantonal and Municipal Subsidies

Many cantons offer grants as part of the Building Program to encourage the replacement of old heating systems with high-performance air-water heat pumps. The amounts depend on the power and performance of the device.

Reduced VAT Rate for Energy Renovation Works

When a heat pump is installed as part of an energy renovation, a reduced VAT rate may apply. This helps to lower the total cost of the project.

Energy Bonuses from Suppliers

Some electricity or gas distributors offer bonuses for the installation of high-energy efficiency equipment. These aids can be combined with cantonal subsidies.

Learn more

FAQ on heat pump installation in Switzerland

The most frequently asked questions help to better understand the constraints and advantages related to the installation of a heat pump.

Is a permit required to install a heat pump in Switzerland?

Yes, a municipal authorization is generally required, especially for outdoor units. It ensures compliance with regulatory distances, aesthetic integration, and potential noise disturbances.

How long does it take to install a heat pump?

The installation of an air-to-air heat pump generally takes one to two days. For an air-to-water heat pump, the project lasts two to three days depending on the configuration of the home and the necessary connections.

What is the lifespan of a heat pump?

A well-maintained heat pump can operate efficiently for 15 to 20 years. Regular checks ensure its performance is maintained and prevent premature wear.

Can a heat pump completely replace an existing heating system?

Yes, air-to-water models can supply radiators or underfloor heating. They provide a complete alternative to traditional heating systems such as gas or oil boilers.

What maintenance is required for a heat pump?

Annual maintenance is recommended, including cleaning filters, checking fluid levels, and inspecting the compressor. These checks ensure optimal performance and extend the system's lifespan.

Learn more

Have your heat pump installed by trusted professionals with Avenir Renovations

Installing an air-to-air or air-to-water heat pump in Switzerland is a strategic choice to combine comfort, savings, and environmental respect. This versatile system ensures efficient heating, effective cooling, and a significant reduction in energy consumption.
Avenir Renovations Switzerland supports you from feasibility study to commissioning, including equipment selection and handling administrative procedures.
Our qualified teams operate in all cantons of Switzerland, including Geneva, Vaud, Neuchâtel, Fribourg, Valais, and Jura. Contact us today for a free quote and discover how to modernize your heating system with a high-performance heat pump.

Learn more

Installation of air-air and air-water heat pumps in Switzerland: comfort, savings, and energy performance everywhere in Switzerland

Our work services by city:

Our guides
These guides may interest you

Our advice
These articles may interest you